KJD17/120V Electromagnetic Pushbutton Switch 120V 16A 5-Pin (1-Pack)

Product Description: Reliable KJD17/120V Replacement Switch for Matched 5-Pin Power Tool Circuits  The KJD17/120V switch is a 5-pin electromagnetic push button switch designed for compatible 120V motor equipment using a matching KJD17/120V style switch layout. It features a green "I" start button, red "O" stop button, black housing, silver-tone flat blade terminals, and a rectangular panel-mount design.  Product Overview  This switch is rated for 120V 16A applications and may be used with compatible concrete mixers, table saws, drill presses, bench grinders, and similar power tool or machinery circuits when the original switch specifications match. Please compare the original switch marking, 5-pin terminal layout, wiring diagram, housing shape, and panel cutout before ordering.  Technical Specifications:  Model: KJD17/120V  Voltage Rating: 120V  Current Rating: 16A  Terminal Count: 5-Pin  Switch Type: No-Volt Release Electromagnetic  Actuator: Push Button (Green Start / Red Stop)  Panel Cutout: Approximately 46.0–46.4 mm width x 22.0 mm height  Terminal Type: Flat Blade (Silver-tone)  Housing Color: Black  Key Features:  No-Volt Release (NVR) Function: This safety feature ensures the switch defaults to the OFF position when power is interrupted, preventing unexpected machine restart when power is restored.  Electromagnetic Latching: The ON button requires a powered control circuit to remain engaged. If the circuit is not wired correctly, the start button may need to be held down or may not stay engaged.  Push Button Control: Green "I" button for starting, red "O" button for stopping – intuitive operation for workshop machinery.  Compatible Equipment (Verify Original Switch Before Purchase):  For Power Tools & Machinery:  For Concrete Mixers  For Table Saws  For Drill Presses  For Bench Grinders  For Band Saws  For Other 120V Stationary Workshop Equipment with Matching KJD17/120V Switch Layout  Important Buyer Warnings – Please Read Before Ordering:  Before ordering, please verify:  Terminal Count: Count the terminals on your original switch – this is a 5-pin switch. It is NOT for 4-pin or 6-pin switches.  Cutout Size: Measure your panel cutout – this switch requires approximately 46.0–46.4 mm x 22.0 mm opening. Panel thickness may affect fit.  Wiring Diagram: The terminal layout is designed around 13/23 IN, 14/24 OUT, and A1 control terminal positions. This is not a simple two-wire toggle switch.  Part Number / Markings: Compare printed markings on your original switch.  Voltage & Amperage: Confirm your equipment is 120V 16A or less.  Installation Notes:  This switch must be wired correctly with a matching 5-pin circuit.  As a no-volt release electromagnetic switch, the ON function requires correct wiring and a powered control circuit.  If the start button does not stay engaged, verify the control circuit wiring.  Disconnect power before installation. Professional installation is recommended for those unfamiliar with electrical wiring.  Package Includes: 1 x KJD17/120V 5-Pin Switch  Important Compatibility Disclaimer: This is an aftermarket replacement part. The buyer is responsible for verifying that this switch matches their specific equipment's original part number, terminal layout (5-pin), wiring diagram, voltage (120V), amperage (16A or less), panel cutout size, and housing shape. Fitment may vary by equipment model, wiring design, panel thickness, and switch position. Compare your original switch to the product images before purchase. Not responsible for fitment errors or improper installation.  Safety Disclaimer: Always disconnect power before performing any electrical work. If you are unsure about installation or compatibility, consult your equipment manual or a qualified electrician. Improper installation can result in electrical shock, equipment damage, or personal injury.

• 5-Pin Switch Verification Required: This is a 5-pin KJD17/120V switch with 120V 16A rating. Please verify your original switch terminal layout before ordering. This is not a 4-pin or 6-pin switch and is not compatible with different wiring patterns.
• No-Volt Release Electromagnetic Function: Features green "I" start button and red "O" stop button. This switch must be wired correctly with a matching 5-pin circuit – if the control circuit is not powered, the ON button may not stay engaged.
• Specific Cutout & Terminal Fit: Designed for matching KJD17/120V style switch applications with approximately 46.0–46.4 x 22.0 mm panel cutout. Compare panel opening, housing shape, and silver-tone flat blade terminals before purchase.
• For Matched Power Tool Circuits: May be used in compatible 120V motor equipment including concrete mixers, table saws, drill presses, bench grinders, and similar machinery when the original KJD17/120V switch layout matches.
• Single Replacement Switch: Includes 1 replacement switch for repair or maintenance use. Please confirm part number, pin count, wiring diagram, voltage, amperage, and panel cutout size before installation.