MOCREO Replacement Temperature Probe, 1.3mm Flat Cable for Fridge Doors

**MOCREO Replacement Temperature Probe for USB-C Compatible Models** Need a replacement temperature probe for your MOCREO monitor? This USB-C temperature probe is designed for the **MOCREO H5Lite Hub, NS1, NS1W, MS1, LS1 and LS2**. Simply unplug the old probe and connect the replacement to the USB-C port—no re-pairing, app setup or recalibration required. The **1.3 mm flat cable** is designed to pass through the narrow gap of a refrigerator door gasket while helping the door close normally. Unlike a round cable that may interfere with the gasket, the slim flat design helps maintain the door seal when monitoring temperature inside a fridge or freezer. The probe features a **waterproof stainless steel tip** and supports temperature readings from **-40°F to 221°F**, making it suitable for a variety of cold-storage applications, including **deep freezers, refrigerators, walk-in coolers and commercial refrigeration**. When the original probe is damaged, pinched, exposed to moisture or no longer providing reliable readings, replacing the probe can restore temperature monitoring without replacing the entire compatible device. **Compatibility:** MOCREO H5Lite Hub, NS1, NS1W, MS1, LS1 and LS2. **Not Compatible With:** MOCREO ST4, ST5, ST9 or ST10, which use a different cylindrical probe. **Cable Length:** 4.92 ft **Cable Thickness:** 1.3 mm flat cable **Temperature Range:** -40°F to 221°F **Probe Tip:** Waterproof stainless steel **Package Includes:** 1 × Replacement Temperature Probe Cable

• CHECK YOUR MODEL BEFORE YOU ORDER - This USB-C temperature probe cable fits the MOCREO H5Lite Hub, NS1, NS1W, MS1, LS1 and LS2. It does not fit ST4, ST5, ST9 or ST10 - those use a different, cylindrical probe, so please check the model on your unit first.
• YOUR MONITOR PROBABLY ISN'T BROKEN - YOUR PROBE IS - The part that actually measures temperature sits in the tip of the probe, and the tip is the one piece that lives in the cold, gets pinched by the door, or chewed by a pet. So when readings start drifting or dropping out, fitting a new temperature probe usually brings the monitor back - you rarely need to replace the whole unit.
• PLUG IT IN AND YOU'RE DONE - Unplug the old one, plug this replacement temperature probe into the USB-C port, and it starts reading. No re-pairing, no app setup, no recalibration - which matters when the freezer is already warming up and you just need it working again.
• THE DOOR STILL CLOSES PROPERLY - At 1.3 mm, the flat cable on this refrigerator temperature probe slips through the 1.5 mm gap built into a fridge door gasket, so the seal keeps its grip instead of being propped open by a round cable - no cold leaking out, no frost line along the door, no gasket left deformed.
• BUILT FOR THE COLD AND THE WET - The stainless steel tip on this waterproof temperature probe reads from -40°F to 221°F within ±0.9°F, so it holds up in a deep freezer, a walk-in cooler or a commercial fridge. In the box: one 4.92 ft probe cable.